Is your mower taking wider turns than you intend? Do you feel one side of your mower is faster than the other? Well, here's the solution to all those worries.
Tune in to this tutorial to find out the 2 ways you can adjust Tracking on your Lawn Mower and get the desired speed and control.
How to Adjust the Tracking on a Toro TimeCutter Lawn Mower
Lawn mower maintenance is crucial for extending the lifespan of your equipment and ensuring optimal performance. One common issue that can arise with zero-turn lawn mowers, such as the Toro TimeCutter, is tracking misalignment. This guide will walk you through the necessary steps to adjust the tracking on two models of the Toro TimeCutter to ensure your mower operates efficiently and effectively.
Introduction to Tracking Adjustment
Tracking refers to how straight the mower travels when directed forward. If a mower is not properly adjusted, it may veer to one side, leading to uneven cuts and increased wear and tear. Proper adjustment is crucial for maintaining the mower’s performance and the health of your lawn.
Step-by-Step Guide to Adjusting Tracking on the 75749 Toro TimeCutter
Initial Handle Alignment
Before making any adjustments to the tracking system, it's essential to ensure the mower's handles are aligned correctly:
- Sit on the mower and check the position of the steering handles. They should be in their neutral (middle) positions.
- If the handles are misaligned, locate the two 9/16 bolts on each steering lever. These are attached to slotted holes allowing for adjustment.
- Loosen these bolts slightly, adjust the handles until they align perfectly, then retighten the bolts.
This preliminary step helps ensure that any further adjustments to the tracking are accurate.
Adjusting the Speed
Once the handles are aligned, further adjustments can be made if the mower still does not track correctly:
- Identify if the mower tends to make unintended turns to one side when pushing both handles forward. This indicates that one side is moving faster than the other.
- Access the lobed cam mechanism, a small, half-moon shaped puck located inside the mower. Adjusting this cam will alter the speed of the mower on one side.
- To adjust, find the 11 millimeter bolt located near the seat. Adjust this bolt to modify the position of the cam, effectively changing the reach that each lever can achieve when moved forward or backward.
By adjusting this mechanism, you can slow down the faster side, ensuring both sides operate at similar speeds, providing a straight, predictable drive path.
Advanced Adjustments on Toro TimeCutter Models (75749 Model)
For models such as the 75749 Toro TimeCutter with a forged deck, adjustments can also include modifications directly from the rear near the transmission:
- Locate the threaded rod that connects to the transmission lever, which moves the rod forward and backward.
- Adjust this rod by tightening or loosening the nut with a half-inch wrench. Make small adjustments and test the mower to see the effects of your modification.
- Continue fine-tuning until the speed of the mower is balanced on both sides.
This method offers an additional way to refine the mower’s handling, particularly helpful if previous adjustments do not fully correct the tracking issue.
Conclusion
Regular maintenance and adjustments to your lawn mower are essential tasks that keep your machine performing optimally and your lawn looking its best. Incorrect tracking not only affects the quality of your lawn cuts but can also place undue stress on your mower, leading to premature wear or failure. By following these steps to adjust the tracking on your Toro TimeCutter, you can ensure that your mower is efficient, reliable, and ready to handle the demands of lawn care with precision. Always remember to perform adjustments in a safe environment and consult your mower’s manual for specific instructions related to your model.
Product Discussed In The Video
- Toro TimeCutter Kohler 22 hp Zero Turn Mower | 42 in. Deck | 75749
Check out more fun and informative videos on our YouTube Channel here:
https://www.youtube.com/@mainstreetmower
#toro timecutter mower, #toro timecutter tracking adjustment, #toro mower won't go straight, #adjust tracking toro mower, #toro mower tracking fix, #how to adjust tracking on toro timecutter, #toro timecutter steering adjustment, #toro timecutter repair, #toro zero turn mower repair, #toro zero turn tracking, #toro zero turn steering adjustment, #toro lawn mower maintenance, #toro lawn mower repair, #mower won't track straight, #zero turn mower tracking problems, #zero turn mower steering issues, #lawn mower repair tutorial, #diy lawn mower repair, #main street mower