Toro-Dingo | SKU: 22530

Dingo TXL 2000 Telescoping Track Loader | Kubota Engine | Diesel | 22530

Name: Dingo TXL 2000 Telescoping Track Loader | Kubota Engine | Diesel | 22530
Brand: Toro-Dingo
SKU: 22530
Price: 77900.00 USD
Availability: InStock

$77,900⁰⁰

Taxes and shipping calculated at checkout.

Dingo TXL 2000 Telescoping Track Loader | Kubota Engine | Diesel | 22530 is backordered and will ship as soon as it is back in stock.

Pickup available at MSM - Clermont

Usually ready in 4 hours

WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov

Toro-exclusive telescoping arm design increases machine versatility with the ability to reach farther and dig below grade without even moving.
Rated operating capacity over 2,000-lbs to lift more than any compact utility loader on the market, comparable to larger compact track and skid steer loaders.
123” (3.1 m) telescoped hinge pin height easily clears the side of a standard dump truck and 44” (112 cm) of telescoped reach allows for unloading of a flat-bed truck from one side.
Exclusive traction control design is intuitive, easy to operate, and effortless. Loader arm joystick includes telescoping function, proportional auxiliary control, and directional left/right control for applicable Toro TXL 2000 attachments.

Telescoping Arms

A Toro-exclusive telescoping arm design allows the operator to lift loads up to 123” high (hinge pin height) and reach out 44” for placement and removal of jobsite materials.

2,000 lbs. ROC
An industry leading 2,000 lbs. rated operating capacity allows the operator to handle many jobsite materials suited for larger machines.

Superior Visibility
A dedicated stand-on machine offers superior 360° visibility for optimized jobsite performance and awareness.

Controls
Toro’s exclusive traction control design allows operator’s of all skill levels to operate the machine with ease and precision. The loader arm control is designed to allow not only loader arm function control, but has the telescoping function, proportional auxiliary control, and directional left/right control for applicable Toro TXL 2000 attachments.

Compact Footprint
A 54” wide frame allows the machine to access smaller spaces that larger machines are not able to.

Ease of Access
The dedicated stand-on platform allows the operator to step-on and step-off the machine with ease and comfort to allow for enhanced jobsite efficiencies – not having to enter/exit a cab.

Specifications

Air Filter	Two-stage, heavy-duty, remote
Cooling System	Liquid Cooled
Dump Angle	46.3 deg
Dump Height	88.9 in. / 225.8 cm
Engine Horsepower	49.6 hp (37 kW)
Engine Make	Kubota
Engine Model	D1803
Fuel Tank	18.3 gal. / 69.3 L
Fuel Type	Diesel
Ground Clearance	6.3 in. / 16.0 cm
Ground Pressure	5.3 psi
Ground Speed - Forward	Up to 5.4 mph / 8.6 km/h
Ground Speed - Reverse	Up to 5.4 mph / 8.6 km/h
Height	67.8 in. / 172.2 cm
Height - With Bucket	67.8 in. / 172.2 cm
Hinge Pin Height	123.4 in. / 313.4 cm
Hinge Pin Height - Extended	123.4 in. / 313.4 cm
Hinge Pin Height - Retracted	98.6 in. / 250.4 cm
Hydraulic Flow - Auxiliary	21.4 GPM
Hydraulic Flow - Traction	21.5 GPM (81.4 LPM)
Hydraulic Pressure Auxiliary	3,000 PSI
Hydraulic Pressure Traction	4,350 PSI
Length	98.8 in. / 250.9 cm
Length - With Bucket	136.9 in. / 347.7 cm
Max Operating Height	67.8 in. / 172.2 cm
Oil Capacity	7.4 qt / 7 L
Rated Operating Capacity - Extended*	920 lbs / 417 kg
Rated Operating Capacity - Retracted*	2,000 lbs / 907 kg
Reach - Fully Raised	45.2 in. / 114.8 cm
Reservoir Capacity	15.25 gal. / 57.7 L
Tip Capacity	5,715 lbs / 2,592 kg
Track Length	162.2 in. / 411.9 cm
Track Width	11.8 in. / 29.9 cm
Tracks	Sprocket-drive, 6 road wheels per side
Traction	Dual Hydrostatic Pump
Weight	6,690 lbs / 3,034.5 kg
Wheelbase	53.7 in. / 136.4 cm
Width	55 in. / 139.7 cm
Width - With Bucket	55 in. / 139.7 cm

Recommended Maintenance Schedule(s)

Maintenance Service Interval	Maintenance Procedure
After the first 8 hours	Check and adjust the track tension.
After the first 50 hours	Change the engine oil and filter. Check and adjust the track tension.
Before each use or daily	Grease the machine.(Grease immediately after every washing.) Check and lubricate the quick-attach linkages using spray lubricant. Check the air-filter-service indicator. Check the engine-oil level. Clean the tracks and check for excessive wear and proper tension. Clean the screen, oil cooler, and front of the radiator (more often in dirty or dusty conditions). Check the coolant level in the expansion tank. Check and clean the radiator screen Check the condition of the alternator belt. Remove debris from the machine. Check for loose fasteners.
Every 25 hours	Check the hydraulic-fluid level. Torque the loader arm adjustment screws (telescoping machines only).Check the torque whenever the lower loader arms rattle.
Every 50 hours	Drain water and other contaminants from the fuel filter/water separator. Check the battery condition. Check and adjust the track tension.
Every 100 hours	Clean and lubricate the underside of the traction controls. Remove the air-cleaner cover and clean out debris.(Clean more often in dirty or dusty conditions.) Check the cooling system hoses. Adjust the alternator belt tension. Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting supports, wear, weather, and chemical deterioration.(Make necessary repairs before operating.) Check for dirt buildup in the chassis. Check the alternator/fan belt tension (refer to the engine owner’s manual for instructions).
Every 400 hours	Change the engine oil and filter.(Service more frequently if conditions are extremely dusty or sandy.) Replace the fuel filter canister. Check the fuel lines and connections for deterioration, damage, or loose connections. Replace the hydraulic oil and filters (if not using Toro fluid).
Every 500 hours	Replace the water separator filter. Drain and clean the fuel tank(s)—Authorized Service Dealer only. Replace the alternator belt—Authorized Service Dealer only Replace the alternator/fan belt (refer to the engine owner’s manual for instructions).
Every 800 hours	Change the engine coolant.
Every 1,000 hours	Replace the drive-motor planetary gear oil. Replace the hydraulic oil and filters (if using Toro fluid).
Every 1,500 hours	Replace all moving hydraulic hoses.
Yearly	Replace the air-cleaner filter.
Yearly or before storage	Check and adjust the track tension. Touch up chipped paint.
Every 2 years	Replace all moving hydraulic hoses.

Description

Toro-exclusive telescoping arm design increases machine versatility with the ability to reach farther and dig below grade without even moving.
Rated operating capacity over 2,000-lbs to lift more than any compact utility loader on the market, comparable to larger compact track and skid steer loaders.
123” (3.1 m) telescoped hinge pin height easily clears the side of a standard dump truck and 44” (112 cm) of telescoped reach allows for unloading of a flat-bed truck from one side.
Exclusive traction control design is intuitive, easy to operate, and effortless. Loader arm joystick includes telescoping function, proportional auxiliary control, and directional left/right control for applicable Toro TXL 2000 attachments.

Telescoping Arms

Specifications

Air Filter	Two-stage, heavy-duty, remote
Cooling System	Liquid Cooled
Dump Angle	46.3 deg
Dump Height	88.9 in. / 225.8 cm
Engine Horsepower	49.6 hp (37 kW)
Engine Make	Kubota
Engine Model	D1803
Fuel Tank	18.3 gal. / 69.3 L
Fuel Type	Diesel
Ground Clearance	6.3 in. / 16.0 cm
Ground Pressure	5.3 psi
Ground Speed - Forward	Up to 5.4 mph / 8.6 km/h
Ground Speed - Reverse	Up to 5.4 mph / 8.6 km/h
Height	67.8 in. / 172.2 cm
Height - With Bucket	67.8 in. / 172.2 cm
Hinge Pin Height	123.4 in. / 313.4 cm
Hinge Pin Height - Extended	123.4 in. / 313.4 cm
Hinge Pin Height - Retracted	98.6 in. / 250.4 cm
Hydraulic Flow - Auxiliary	21.4 GPM
Hydraulic Flow - Traction	21.5 GPM (81.4 LPM)
Hydraulic Pressure Auxiliary	3,000 PSI
Hydraulic Pressure Traction	4,350 PSI
Length	98.8 in. / 250.9 cm
Length - With Bucket	136.9 in. / 347.7 cm
Max Operating Height	67.8 in. / 172.2 cm
Oil Capacity	7.4 qt / 7 L
Rated Operating Capacity - Extended*	920 lbs / 417 kg
Rated Operating Capacity - Retracted*	2,000 lbs / 907 kg
Reach - Fully Raised	45.2 in. / 114.8 cm
Reservoir Capacity	15.25 gal. / 57.7 L
Tip Capacity	5,715 lbs / 2,592 kg
Track Length	162.2 in. / 411.9 cm
Track Width	11.8 in. / 29.9 cm
Tracks	Sprocket-drive, 6 road wheels per side
Traction	Dual Hydrostatic Pump
Weight	6,690 lbs / 3,034.5 kg
Wheelbase	53.7 in. / 136.4 cm
Width	55 in. / 139.7 cm
Width - With Bucket	55 in. / 139.7 cm

Recommended Maintenance Schedule(s)

Maintenance Service Interval	Maintenance Procedure
After the first 8 hours	Check and adjust the track tension.
After the first 50 hours	Change the engine oil and filter. Check and adjust the track tension.
Before each use or daily	Grease the machine.(Grease immediately after every washing.) Check and lubricate the quick-attach linkages using spray lubricant. Check the air-filter-service indicator. Check the engine-oil level. Clean the tracks and check for excessive wear and proper tension. Clean the screen, oil cooler, and front of the radiator (more often in dirty or dusty conditions). Check the coolant level in the expansion tank. Check and clean the radiator screen Check the condition of the alternator belt. Remove debris from the machine. Check for loose fasteners.
Every 25 hours	Check the hydraulic-fluid level. Torque the loader arm adjustment screws (telescoping machines only).Check the torque whenever the lower loader arms rattle.
Every 50 hours	Drain water and other contaminants from the fuel filter/water separator. Check the battery condition. Check and adjust the track tension.
Every 100 hours	Clean and lubricate the underside of the traction controls. Remove the air-cleaner cover and clean out debris.(Clean more often in dirty or dusty conditions.) Check the cooling system hoses. Adjust the alternator belt tension. Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting supports, wear, weather, and chemical deterioration.(Make necessary repairs before operating.) Check for dirt buildup in the chassis. Check the alternator/fan belt tension (refer to the engine owner’s manual for instructions).
Every 400 hours	Change the engine oil and filter.(Service more frequently if conditions are extremely dusty or sandy.) Replace the fuel filter canister. Check the fuel lines and connections for deterioration, damage, or loose connections. Replace the hydraulic oil and filters (if not using Toro fluid).
Every 500 hours	Replace the water separator filter. Drain and clean the fuel tank(s)—Authorized Service Dealer only. Replace the alternator belt—Authorized Service Dealer only Replace the alternator/fan belt (refer to the engine owner’s manual for instructions).
Every 800 hours	Change the engine coolant.
Every 1,000 hours	Replace the drive-motor planetary gear oil. Replace the hydraulic oil and filters (if using Toro fluid).
Every 1,500 hours	Replace all moving hydraulic hoses.
Yearly	Replace the air-cleaner filter.
Yearly or before storage	Check and adjust the track tension. Touch up chipped paint.
Every 2 years	Replace all moving hydraulic hoses.