Toro AeroMaster | 35hp Vanguard | Stand-On | Turbine Blower | 8,100 CFM | 35210
Toro AeroMaster | 35hp Vanguard | Stand-On | Turbine Blower | 8,100 CFM | 35210 is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at MSM - Clermont
WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov
Key Features
- Clear wet, stuck-on debris in a single pass with 8,100 cfm
- Easily redirect airflow a full 180 degrees from your fingertips
- Stop and start airflow in an instant to protect finished garden beds and driveways
- Soak up curbs and bumps with a toggle front axle and stay productive all day
- Take on curbs and trailer ramps with a nozzle that flexes on impact
- Flip the nozzle up to save trailer space and load faster between sites
- Flip the nozzle up to save trailer space and load faster between sites
- Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
When the big cleanups hit, spring, fall, or the day after a storm, the Toro AeroMaster Stand-On Turbine Blower helps you clear them fast and move to the next job. It pushes 8,100 cfm, more airflow than the category's leading stand-on blowers, and clears heavy, wet, stuck-on debris in a single pass. Aim every bit of that force a full 180 degrees from your fingertips, then stop and start airflow in an instant to keep debris out of garden beds, driveways, and traffic. A toggle front axle smooths out rough ground so productivity holds up from the first job to the last, and the flexible air nozzle flexes on impact where rigid designs crack then flips up for faster loading and a smaller trailer footprint. The result: the AeroMaster makes every cleanup faster and easier, from start to finish.
| CARB Compliant | CARB Compliant |
| CFM (Effective) | 9600 |
| CFM (Peak) | 8100 |
| Drive | Horizontal with Stub + Belt/Clutch |
| Drive Speed (Max) | Up to 8.5 mph / 13.6 kph |
| Engine Brand | Vanguard |
| Engine Displacement (cc) | 993 cc |
| Engine Horsepower | 35 hp |
| Fuel Capacity | 10 gal. / 37.8 L / 40 Qt. |
| Fuel Type | Gasoline |
| Hydros | ZT3100 |
| Tires | Front tires: 13" x 6.5" - 6" (33 cm x 16.5 cm - 15 cm) Pneumatic Rear tires: 22" x 11" - 10" (55.9 cm x 27.9 cm - 25.4 cm) |
| Weight | 900 lbs / 409 kg |
| Disclaimer | *Based on commercial competitors’ published maximum CFM data on September 1, 2026. |
|
Maintenance
Service Interval |
Maintenance Procedure
|
|---|---|
|
After the first 5 hours
|
Change the engine oil.
|
|
After the first 100 hours
|
Change the hydraulic oil.
|
|
Change the hydraulic filter.
|
|
|
Check the wheel lug nuts.
|
|
|
Before each use or daily
|
Check the air filter.
|
|
Check the safety interlocks.
|
|
|
Check the engine oil level.
|
|
|
Check for loose hardware.
|
|
|
Check the fuel strainer, filter, and tank.
|
|
|
Clean the engine and exhaust system area.
|
|
|
Clean the debris build-up from the machine.
|
|
|
Every 25 hours
|
Check the tire pressure.
|
|
Every 50 hours
|
Check the hydraulic fluid level.
|
|
Check the tire pressure.
|
|
|
Every 80 hours
|
Remove the engine shrouds and clean the cooling fins.
|
|
Every 100 hours
|
Replace the air cleaner element.
|
|
Change the engine oil (more often in dusty or dirty conditions)
|
|
|
Check the spark plugs.
|
|
|
Every 400 hours
|
Change the hydraulic filter.
|
|
Change the hydraulic fluid.
|
|
|
Check the wheel lug nuts.
|
|
|
Every 500 hours
|
Lubricate the grease fittings.
|
|
Monthly
|
Check the battery.
|
Description
Description
Key Features
- Clear wet, stuck-on debris in a single pass with 8,100 cfm
- Easily redirect airflow a full 180 degrees from your fingertips
- Stop and start airflow in an instant to protect finished garden beds and driveways
- Soak up curbs and bumps with a toggle front axle and stay productive all day
- Take on curbs and trailer ramps with a nozzle that flexes on impact
- Flip the nozzle up to save trailer space and load faster between sites
- Flip the nozzle up to save trailer space and load faster between sites
- Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
When the big cleanups hit, spring, fall, or the day after a storm, the Toro AeroMaster Stand-On Turbine Blower helps you clear them fast and move to the next job. It pushes 8,100 cfm, more airflow than the category's leading stand-on blowers, and clears heavy, wet, stuck-on debris in a single pass. Aim every bit of that force a full 180 degrees from your fingertips, then stop and start airflow in an instant to keep debris out of garden beds, driveways, and traffic. A toggle front axle smooths out rough ground so productivity holds up from the first job to the last, and the flexible air nozzle flexes on impact where rigid designs crack then flips up for faster loading and a smaller trailer footprint. The result: the AeroMaster makes every cleanup faster and easier, from start to finish.
| CARB Compliant | CARB Compliant |
| CFM (Effective) | 9600 |
| CFM (Peak) | 8100 |
| Drive | Horizontal with Stub + Belt/Clutch |
| Drive Speed (Max) | Up to 8.5 mph / 13.6 kph |
| Engine Brand | Vanguard |
| Engine Displacement (cc) | 993 cc |
| Engine Horsepower | 35 hp |
| Fuel Capacity | 10 gal. / 37.8 L / 40 Qt. |
| Fuel Type | Gasoline |
| Hydros | ZT3100 |
| Tires | Front tires: 13" x 6.5" - 6" (33 cm x 16.5 cm - 15 cm) Pneumatic Rear tires: 22" x 11" - 10" (55.9 cm x 27.9 cm - 25.4 cm) |
| Weight | 900 lbs / 409 kg |
| Disclaimer | *Based on commercial competitors’ published maximum CFM data on September 1, 2026. |
|
Maintenance
Service Interval |
Maintenance Procedure
|
|---|---|
|
After the first 5 hours
|
Change the engine oil.
|
|
After the first 100 hours
|
Change the hydraulic oil.
|
|
Change the hydraulic filter.
|
|
|
Check the wheel lug nuts.
|
|
|
Before each use or daily
|
Check the air filter.
|
|
Check the safety interlocks.
|
|
|
Check the engine oil level.
|
|
|
Check for loose hardware.
|
|
|
Check the fuel strainer, filter, and tank.
|
|
|
Clean the engine and exhaust system area.
|
|
|
Clean the debris build-up from the machine.
|
|
|
Every 25 hours
|
Check the tire pressure.
|
|
Every 50 hours
|
Check the hydraulic fluid level.
|
|
Check the tire pressure.
|
|
|
Every 80 hours
|
Remove the engine shrouds and clean the cooling fins.
|
|
Every 100 hours
|
Replace the air cleaner element.
|
|
Change the engine oil (more often in dusty or dirty conditions)
|
|
|
Check the spark plugs.
|
|
|
Every 400 hours
|
Change the hydraulic filter.
|
|
Change the hydraulic fluid.
|
|
|
Check the wheel lug nuts.
|
|
|
Every 500 hours
|
Lubricate the grease fittings.
|
|
Monthly
|
Check the battery.
|



