1 6
Toro  |  SKU: 74535

Toro GrandStand HDM | 36 in Deck | 18.5 hp Kawasaki | 74535

$10,99900
Taxes and shipping calculated at checkout.

Pickup currently unavailable at MSM - Clermont

WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov

Stand up to long days and complex mowing jobs with the redesigned 36-inch GrandStand stand-on mower. Combining the speed and comfort of a zero-turn riding mower with the ease and maneuverability of a walk mower, you'll knock out more jobs, faster, without the fatigue of a small walk-behind. From mowing to maintenance, this compact machine is built for easy, fast work.

  • Compact for access to more yards, exceptional maneuverability, and easy storage and trailering.
  • Mow more in less time without the fatigue that comes with operating a small walk-behind mower.
  • Get the job done 3x faster than a 21-inch walk behind mower.**
    **Disclaimer: Ground coverage via wider cutting path and enhanced speed of 32" GrandStand Compact vs 21" Heavy Duty mower and will vary due to mowing conditions.
  • Redesigned hood flips up for easy maintenance and cleaning.
  • Trim close without damaging landscape structures or your chute.
  • Lift and lock the rear cover into place to easily check and fill both engine oil and hydro fluid.
  • Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
Maintenance Service Interval Maintenance Procedure
After the first 5 hours
  • Change the engine oil.
After the first 100 hours
  • Check the wheel hub torque specification.
  • Check the wheel lug nuts.
After the first 250 hours
  • Change the hydraulic filter and fluid.
Before each use or daily
  • Check the engine-oil level.
  • Check for loose hardware.
  • Clean the grass and debris build-up from the machine and cutting deck.
  • Clean the engine and exhaust system area.(May be required more often in dry or dirty conditions.)
  • Clean the grass build-up from under the deck.
Every 25 hours
  • Service the foam element.(May need more often under severe conditions. See the Engine Owner's manual for additional information.)
Every 50 hours
  • Check spark arrester (if equipped).
  • Check the tire pressures.
  • Check the condition of the belts.
  • Check the hydraulic oil level.
Every 80 hours
  • Remove engine shrouds and clean cooling fins.
Every 100 hours
  • Service the paper element. (May need more often under severe conditions. See the Engine Owner's manual for additional information.)
  • Change the engine oil.(May need more often under severe conditions.)
Every 160 hours
  • Check the spark plugs.
Every 200 hours
  • Replace the paper element.
Every 500 hours
  • Check the wheel hub torque specification.thereafter
  • Check the wheel lug nuts.
  • Change the hydraulic filter and fluid (Every 250 hours/Yearly if using Mobil 1 15W50)thereafter. (Every 250 hours/Yearly if using Mobil 1 15W50 thereafter)
Yearly
  • Grease the deck belt idler pivot.

Description

Stand up to long days and complex mowing jobs with the redesigned 36-inch GrandStand stand-on mower. Combining the speed and comfort of a zero-turn riding mower with the ease and maneuverability of a walk mower, you'll knock out more jobs, faster, without the fatigue of a small walk-behind. From mowing to maintenance, this compact machine is built for easy, fast work.

  • Compact for access to more yards, exceptional maneuverability, and easy storage and trailering.
  • Mow more in less time without the fatigue that comes with operating a small walk-behind mower.
  • Get the job done 3x faster than a 21-inch walk behind mower.**
    **Disclaimer: Ground coverage via wider cutting path and enhanced speed of 32" GrandStand Compact vs 21" Heavy Duty mower and will vary due to mowing conditions.
  • Redesigned hood flips up for easy maintenance and cleaning.
  • Trim close without damaging landscape structures or your chute.
  • Lift and lock the rear cover into place to easily check and fill both engine oil and hydro fluid.
  • Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
Maintenance Service Interval Maintenance Procedure
After the first 5 hours
  • Change the engine oil.
After the first 100 hours
  • Check the wheel hub torque specification.
  • Check the wheel lug nuts.
After the first 250 hours
  • Change the hydraulic filter and fluid.
Before each use or daily
  • Check the engine-oil level.
  • Check for loose hardware.
  • Clean the grass and debris build-up from the machine and cutting deck.
  • Clean the engine and exhaust system area.(May be required more often in dry or dirty conditions.)
  • Clean the grass build-up from under the deck.
Every 25 hours
  • Service the foam element.(May need more often under severe conditions. See the Engine Owner's manual for additional information.)
Every 50 hours
  • Check spark arrester (if equipped).
  • Check the tire pressures.
  • Check the condition of the belts.
  • Check the hydraulic oil level.
Every 80 hours
  • Remove engine shrouds and clean cooling fins.
Every 100 hours
  • Service the paper element. (May need more often under severe conditions. See the Engine Owner's manual for additional information.)
  • Change the engine oil.(May need more often under severe conditions.)
Every 160 hours
  • Check the spark plugs.
Every 200 hours
  • Replace the paper element.
Every 500 hours
  • Check the wheel hub torque specification.thereafter
  • Check the wheel lug nuts.
  • Change the hydraulic filter and fluid (Every 250 hours/Yearly if using Mobil 1 15W50)thereafter. (Every 250 hours/Yearly if using Mobil 1 15W50 thereafter)
Yearly
  • Grease the deck belt idler pivot.