A chainsaw with reduced-emission engine technology, STIHL Easy2Start™ and Quick Chain Adjuster.
The MS 181 C-BE is our gift to anyone who gets that technology is here to serve us. (And not the other way around.) With the Easy2Start™ system on board, firing up this chainsaw couldn’t be simpler or faster. Just a light pull on the cord does it. And our Quick Chain Adjuster makes it possible to adjust the saw chain without tools. This model also has our pre-separation air filtration system – which can extend the life of your air filter up to five times over previous models.
|MS 181 C-BE Specifications - Occasional Use|
|DISPLACEMENT||31.8 cc (1.9 cu. in.)|
|ENGINE POWER||1.5 kW (2.0 bhp)|
|POWERHEAD WEIGHT||4.6 kg (10.1 lbs.)|
|FUEL CAPACITY||280 cc (9.5 oz.)|
|CHAIN OIL CAPACITY||180 cc (6.1 oz.)|
|OILOMATIC® CHAIN||3/8" PMM3|
|GUIDE BAR LENGTHS (Recommended ranges)||30 to 40 cm (12" to 16")
STIHL ROLLOMATIC® E
|STIHL recommends #3610 (61 PMM3 55) OILOMATIC® saw chain and 16" 3005 008 3919 STIHL ROLLOMATIC® Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.|
Built in the USA
Indicates products that are built in the United States from domestic and foreign parts and components.
STIHL Easy2Start™ (E)
The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
Quick Chain Adjuster (QCA) (B)
The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
See it in action!
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.