How to Start your TORO 4000 Series - TORO ZMaster.

How to Start Your Toro 4000 Series Mower: A Step-by-Step Guide

Starting a lawn mower might seem straightforward, but ensuring you perform the correct steps in the right order can save you time and prevent damage to your machine. The Toro 4000 series mower is a robust piece of equipment favored by many for its efficiency and reliability. Here’s a detailed guide on how to properly start your Toro 4000 series to ensure optimal performance.

Preparing to Start the Mower

Before attempting to start your Toro 4000 series mower, it’s vital to perform a few preparatory steps to ensure safety and readiness:

  • Ensure Handles Are Fully Open: Confirm that the mower’s handles are extended fully. This not only ensures safety but also allows full operational capability.
  • Engage the Parking Brake: Locate the parking brake lever on the left-hand side of the mower. Make sure it is fully engaged by pushing it into the upward position. This step is crucial to prevent the mower from moving unexpectedly.
  • Check the PTO Switch: The Power Take-Off (PTO) switch should be in the OFF position before starting the engine. The switch is typically yellow, and you should press the plain side down to disengage any mower blades or attached tools.

Starting the Engine

With the preliminary checks out of the way, you can move on to the actual starting process:

  1. Adjust the Choke: Locate the choke knob and pull it upward to the maximum position. The choke helps in providing the engine with the right air-to-fuel ratio for starting, especially in colder conditions.
  2. Set the Throttle: Adjust the throttle to about three-quarters. This setting helps in providing enough power to start the mower without overwhelming the engine.
  3. Turn the Key: Insert the key into the ignition and turn it to start the mower. Keep an eye on the engine’s response.

Monitoring and Adjusting After Starting

After the engine starts, a few additional steps are required to ensure the mower operates smoothly:

  • Listen to the Engine: As the engine starts and stabilizes, listen for any unusual noises. Irregular sounds could indicate a problem that might need immediate attention.
  • Adjust the Choke Gradually: Slowly ease the choke back down. If done too quickly, the engine might stall or sputter. This step helps the engine transition to normal operating conditions.
  • Observe the Mower’s Performance: As the mower warms up, observe its performance for any signs of distress or malfunction.


Starting your Toro 4000 series mower correctly is essential for ensuring its longevity and performance. By following these detailed steps, you can ensure that your mower starts smoothly and runs at its best. Always remember to perform the preparatory safety checks before starting the engine, and adjust the settings as the engine warms up. With the right start, you’re ready to tackle your lawn maintenance tasks more efficiently and safely. Happy mowing!

Shop the Toro Z-Master 4000 Series

 Check out more fun and informative videos on our YouTube Channel here:


#lawn mower, #toro lawn mower, #toro z master, #how to start toro z master, #how to start toro mower, #toro commercial lawn mower, #toro commercial mower, #toro zero turn mower, #toro zero turn, #toro mower operation, #toro 4000 series mower, #toro z master 4000 series, #commercial mower, #starting instructions, #commercial lawn mower how-to, #lawn care equipment, #landscape equipment, #grounds maintenance, #commercial mower, #how to video, #toro product guide, #toro mower troubleshooting, main street mower

Mower repairToro zmaster

Leave a comment