1 2
Toro  |  SKU: 22600

Toro SGR-6 Stump Grinder | 22600

$3,60500
Taxes and shipping calculated at checkout.

WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov

Compact & Maneuverable SGR stump grinders are well balanced, easy to operate and simple to maintain for the smoothest cutting. The compact models allow you to access hard to reach stumps.
Easy Loading & Transport Lift handles ensure easy loading and unloading. Foldable handle allows compact transport in an SUV, car, trunk or minivan.
Heavy-Duty Components Heavy-duty centrifugal clutch is built to handle stump impact. Rubber gaskets between handle and frame help reduce vibration and operator fatigue.

Specifications

Belt Cogged
Clutch Centrifugal
Cutter Depth - Below Grade 6 in. / 15.2 cm
Cutter Height - Above Grade 10.4 in. / 26.4 cm
Engine Make Honda
Engine Model GX200
Fuel Type Gasoline
Height 42 in. / 106.6 cm
Length 50 in. / 127.0 cm
Start Method Recoil
Weight 103 lbs / 46 kg
Wheel 9.5" (24.3 cm) diameter to tooth; 3 grinder teeth
Width 22 in. / 55.8 cm

 

Recommended Maintenance Schedule(s)

Maintenance Service Interval Maintenance Procedure
After the first 20 hours
  • Change the engine oil.
Before each use or daily
  • Check the air filter(more often in dirty or dusty conditions).
  • Check the engine-oil level.
  • Clean the engine screen.
  • Check the condition of the teeth; rotate or replace any that are worn or damaged and torque the nuts for all teeth.
  • Remove debris from the machine.
Every 25 hours
  • Check the drive-belt tension.
Every 50 hours
  • Service the air filter(more often in dirty or dusty conditions).
Every 100 hours
  • Change the engine oil.(Service more frequently if conditions are extremely dusty or sandy.)
  • Check the spark plug.
  • Clean the sediment cup.
Every 300 hours
  • Replace the air filter.
  • Replace the spark plug.
Yearly or before storage
  • Change the engine oil.
  • Clean the sediment cup.

Description
Compact & Maneuverable SGR stump grinders are well balanced, easy to operate and simple to maintain for the smoothest cutting. The compact models allow you to access hard to reach stumps.
Easy Loading & Transport Lift handles ensure easy loading and unloading. Foldable handle allows compact transport in an SUV, car, trunk or minivan.
Heavy-Duty Components Heavy-duty centrifugal clutch is built to handle stump impact. Rubber gaskets between handle and frame help reduce vibration and operator fatigue.

Specifications

Belt Cogged
Clutch Centrifugal
Cutter Depth - Below Grade 6 in. / 15.2 cm
Cutter Height - Above Grade 10.4 in. / 26.4 cm
Engine Make Honda
Engine Model GX200
Fuel Type Gasoline
Height 42 in. / 106.6 cm
Length 50 in. / 127.0 cm
Start Method Recoil
Weight 103 lbs / 46 kg
Wheel 9.5" (24.3 cm) diameter to tooth; 3 grinder teeth
Width 22 in. / 55.8 cm

 

Recommended Maintenance Schedule(s)

Maintenance Service Interval Maintenance Procedure
After the first 20 hours
  • Change the engine oil.
Before each use or daily
  • Check the air filter(more often in dirty or dusty conditions).
  • Check the engine-oil level.
  • Clean the engine screen.
  • Check the condition of the teeth; rotate or replace any that are worn or damaged and torque the nuts for all teeth.
  • Remove debris from the machine.
Every 25 hours
  • Check the drive-belt tension.
Every 50 hours
  • Service the air filter(more often in dirty or dusty conditions).
Every 100 hours
  • Change the engine oil.(Service more frequently if conditions are extremely dusty or sandy.)
  • Check the spark plug.
  • Clean the sediment cup.
Every 300 hours
  • Replace the air filter.
  • Replace the spark plug.
Yearly or before storage
  • Change the engine oil.
  • Clean the sediment cup.