Toro STX-26 Stump Grinder | 23208
Toro STX-26 Stump Grinder | 23208 is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at MSM - Clermont
WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
- Intelli-sweep® automatically adjusts cutting head sweep speed
- Turn stumps to chips quickly
- Hydraulically driven cutting head
- No tire ruts or flat tires
Specifications
| Cutter Depth - Below Grade | 12.5 in. / 31.7 cm |
|---|---|
| Cutter Height - Above Grade | 33 in. / 83.8 cm |
| Engine Cooling System | Air Cooled |
| Engine Horsepower | 26.0 hp |
| Engine Make | Kawasaki |
| Engine Model | FX-730V Twin Cylinder 4-cycle |
| Fuel Type | Gasoline |
| Head Swing | 47" (119.3 cm) arc length x 90˚ sweep arc |
| Height | 46 in. / 116.8 cm |
| Length | 78 in. / 198.1 cm |
| Start Method | Electric |
| Transmission | Hydrostatic |
| Travel Speed - Forward | Up to 4.2 mph / 6.7 kph |
| Weight | 1,200 lbs / 544 kg |
| Wheel | 19" (48.2 cm) diameter to tooth: .75" (1.9 cm) thick: 12 grinder teeth |
| Width | 34 in. / 86.3 cm |
Toro STX-26 Stump Grinder | 23208
Description
Description
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
- Intelli-sweep® automatically adjusts cutting head sweep speed
- Turn stumps to chips quickly
- Hydraulically driven cutting head
- No tire ruts or flat tires
Specifications
| Cutter Depth - Below Grade | 12.5 in. / 31.7 cm |
|---|---|
| Cutter Height - Above Grade | 33 in. / 83.8 cm |
| Engine Cooling System | Air Cooled |
| Engine Horsepower | 26.0 hp |
| Engine Make | Kawasaki |
| Engine Model | FX-730V Twin Cylinder 4-cycle |
| Fuel Type | Gasoline |
| Head Swing | 47" (119.3 cm) arc length x 90˚ sweep arc |
| Height | 46 in. / 116.8 cm |
| Length | 78 in. / 198.1 cm |
| Start Method | Electric |
| Transmission | Hydrostatic |
| Travel Speed - Forward | Up to 4.2 mph / 6.7 kph |
| Weight | 1,200 lbs / 544 kg |
| Wheel | 19" (48.2 cm) diameter to tooth: .75" (1.9 cm) thick: 12 grinder teeth |
| Width | 34 in. / 86.3 cm |
