Toro Ultra Buggy e2500 | Toro HyperCell | 68037
Toro Ultra Buggy e2500 | Toro HyperCell | 68037 is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at MSM - Clermont
WARNING: This product can expose you to chemicals including lead and lead compounds, which is [are] known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov
Exceptional runtime and a compact nature make it nimble and convenient, electric power eliminates engine exhaust emissions, and the thick, polyethylene tub handles all types of material. The electric Ultra Buggy is powered by HyperCell®, a battery system developed by Toro, to match the power of our traditional gas powered products and is optimized to deliver an exceptional eight-hour continuous runtime, allowing it to run as long as your crew.
- HyperCell Power System® delivers up to 8 hours of continuous runtime.
- Compact footprint easily clears hard to reach areas.
- Unbeatable 2,500 pound carrying capacity.
Specifications
| Battery Capacity | 7 kWh |
|---|---|
| Battery Charging Requirements | 15 amps at 120V |
| Battery Charging Time | Up to 8 hours for full charge |
| Battery Charging Type | 120V, on-board |
| Battery Chemistry | Toro HyperCell Lithium Ion |
| Discharge Height | 6.5 in. / 16.5 cm |
| Dump Position | Straight |
| Fuel Type | Electric |
| Height | 45 in. / 114.3 cm |
| Length - Platform Down | 111 in. / 281.9 cm |
| Length - Platform Up | 94 in. / 238.8 cm |
| Maximum Load Capacity | 2,500 lbs / 1,134 kg |
| Run Time | Up to 8 continuous hours |
| Speed - Forward | Up to 6 mph / 9.7 km/h |
| Speed - Reverse | Up to 4 mph / 6.4 km/h |
| Tires | Non-marking |
| Tub Material | Polyethylene |
| Tub Volume | 14 ft³ (0.4 m³) |
| Weight | 1,530 lbs / 694 kg |
| Width With Dual Wheel | 42 in. / 106.6 cm |
| Width With Single Wheel | 31.5 in. / 80.65 cm |
Recommended Maintenance Schedule
|
Maintenance Service Interval |
Maintenance Procedure |
Part No. |
Qty |
Description |
|
After the first 50 hours |
Changing the Drive-Motor Gear Oil |
144-6880 |
1 |
Gear oil |
|
Before each use or daily |
Check the hydraulic fluid level. |
- |
- |
- |
|
Removing Debris |
- |
- |
- |
|
|
Check for loose fasteners. |
- |
- |
- |
|
|
Every 40 hours |
Checking the Anti-Static Strap |
139-7731 |
1 |
Anti-static strap |
|
Check the condition of the tires. |
- |
- |
- |
|
|
Check the lug nuts. |
- |
- |
- |
|
|
Check the hydraulic lines. |
- |
- |
- |
|
|
Every 50 hours |
Grease and oil the machine. |
- |
- |
- |
|
Every 500 hours |
Changing the Drive-Motor Gear Oil |
144-6880 |
1 |
Gear oil |
|
Change the hydraulic fluid. |
505-136 |
1 |
Hydraulic fluid |
|
|
Every 1,500 hours |
Replace all moving hydraulic hoses. |
144-1736 |
1 |
Hydraulic hose |
|
144-1737 |
1 |
Hydraulic hose |
||
|
Yearly or before storage |
Touch up chipped paint. |
361-9 |
1 |
Paint |
|
361-10 |
1 |
Paint |
||
|
Changing the Hydraulic Fluid |
505-136 |
1 |
Hydraulic fluid |
Description
Description
Exceptional runtime and a compact nature make it nimble and convenient, electric power eliminates engine exhaust emissions, and the thick, polyethylene tub handles all types of material. The electric Ultra Buggy is powered by HyperCell®, a battery system developed by Toro, to match the power of our traditional gas powered products and is optimized to deliver an exceptional eight-hour continuous runtime, allowing it to run as long as your crew.
- HyperCell Power System® delivers up to 8 hours of continuous runtime.
- Compact footprint easily clears hard to reach areas.
- Unbeatable 2,500 pound carrying capacity.
Specifications
| Battery Capacity | 7 kWh |
|---|---|
| Battery Charging Requirements | 15 amps at 120V |
| Battery Charging Time | Up to 8 hours for full charge |
| Battery Charging Type | 120V, on-board |
| Battery Chemistry | Toro HyperCell Lithium Ion |
| Discharge Height | 6.5 in. / 16.5 cm |
| Dump Position | Straight |
| Fuel Type | Electric |
| Height | 45 in. / 114.3 cm |
| Length - Platform Down | 111 in. / 281.9 cm |
| Length - Platform Up | 94 in. / 238.8 cm |
| Maximum Load Capacity | 2,500 lbs / 1,134 kg |
| Run Time | Up to 8 continuous hours |
| Speed - Forward | Up to 6 mph / 9.7 km/h |
| Speed - Reverse | Up to 4 mph / 6.4 km/h |
| Tires | Non-marking |
| Tub Material | Polyethylene |
| Tub Volume | 14 ft³ (0.4 m³) |
| Weight | 1,530 lbs / 694 kg |
| Width With Dual Wheel | 42 in. / 106.6 cm |
| Width With Single Wheel | 31.5 in. / 80.65 cm |
Recommended Maintenance Schedule
|
Maintenance Service Interval |
Maintenance Procedure |
Part No. |
Qty |
Description |
|
After the first 50 hours |
Changing the Drive-Motor Gear Oil |
144-6880 |
1 |
Gear oil |
|
Before each use or daily |
Check the hydraulic fluid level. |
- |
- |
- |
|
Removing Debris |
- |
- |
- |
|
|
Check for loose fasteners. |
- |
- |
- |
|
|
Every 40 hours |
Checking the Anti-Static Strap |
139-7731 |
1 |
Anti-static strap |
|
Check the condition of the tires. |
- |
- |
- |
|
|
Check the lug nuts. |
- |
- |
- |
|
|
Check the hydraulic lines. |
- |
- |
- |
|
|
Every 50 hours |
Grease and oil the machine. |
- |
- |
- |
|
Every 500 hours |
Changing the Drive-Motor Gear Oil |
144-6880 |
1 |
Gear oil |
|
Change the hydraulic fluid. |
505-136 |
1 |
Hydraulic fluid |
|
|
Every 1,500 hours |
Replace all moving hydraulic hoses. |
144-1736 |
1 |
Hydraulic hose |
|
144-1737 |
1 |
Hydraulic hose |
||
|
Yearly or before storage |
Touch up chipped paint. |
361-9 |
1 |
Paint |
|
361-10 |
1 |
Paint |
||
|
Changing the Hydraulic Fluid |
505-136 |
1 |
Hydraulic fluid |




