- Deluxe suspension seat with iso-mounts to reduce operator fatigue and vibration
- Tech Assist - Save fuel and enjoy top performance with Horizon™.
- Horizon360® Business Management Software. Work More Efficiently. Run More Profitably.
Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a side discharge 60 in. commercial cutting deck. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.
Specifications
Adjustable Discharge Baffle |
Standard |
Air Filter |
Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor |
Anti Scalp Wheels |
6 Standard |
Armrests |
Standard |
Blade Tip Speed |
18,200 ft/min / 5,547 m.min |
Blades |
3 blades at 20.5 in. length |
Caster Tires |
15 in. x 6 in. - 6 in. (38.1 cm x 15.2 cm - 15.2 cm) Flat-Free Semi-Pneumatic |
Clutch |
Wet Disc |
Deck Design |
7-Gauge TURBO FORCE® w/ Bull-Nose Bumper |
Deck Size |
72 in / 183 cm |
Discharge Chute |
Rubber |
Drive System |
17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump |
Drive Tires |
Drive Tires |
Engine |
25 hp* Yanmar® Diesel 1267 cc |
Engine Brand |
Yanmar |
Engine Displacement (cc) |
1267 cc |
Engine Horsepower |
25.0 hp |
Foot Operated Height of Cut |
Hydraulic with Rocker Switch |
Forward Ground/Transport Speed |
Up to 12.5 mph / 20.1 kph |
Fuel Capacity |
12.5 gal. / 47.3 L / 50 Qt. |
Fuel Type |
Diesel |
Height of Cut |
1.0 - 5.5 in. / 2.5 - 14.0 cm |
Hour Meter |
Horizon™ Technology |
Number of Blades |
3 |
Product Type |
Zero Turn Mowers |
Roll-Over Protection (ROPS) |
Standard |
Seat |
Deluxe Suspension Seat |
Spindle Bearings |
Maintenance-free |
Spindle Housing |
9 in / 22.9 cm Diameter Cast Iron |
Start Type |
Electric |
Steering Controls |
1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened |
Disclaimer
* The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.